Информация о продукте
Tinplate Can production line for baby rice milk powder food
| Model: | XLTX Automatic pail can line | |
| Dimension:(L×W×H)7600×1800×2900mm | ||
| Conveyor can be added according requirement. | ||
| Can speed: 35-40 cans/min | ||
| Can height: 250-450mm | ||
| Power: Three phrases four wire, 380V | ||
| Air pressure: 0.5-0.7 Mpa | ||
| Total weight:Around 22t | ||
| Second: Working Procedure | ||
| cam transmission,mechanical cam | ||
| Main parameter | |
| This machine adapts PLC, Auto servo motor. The whole procedure is safety, easy to operate and environmental. | |
| Adapt mechanical cam transmission system, clamp and send can by cam, Speed is adjustable. | |
| Installed with the devices of detecting can body in appointed place, protecting stacked can and safety among each | |
| moments and procedures. Ensure the whole procedure more safe and fluent. | |
| When the height need adjusted, all combination will make the relevant adjustment and testing in end point by | |
| PLC automatically. Make the procedure of change can’s specification can be made by a | |
| accomplished signal, more fast and correct. | |
| Seamer head no need clutch, and the transmission chain is more short, all the rotating is adapt rolling type, | |
| so that save more damage, and can longer the use life, reduce the maintenance rate. | |
| The whole line is working automatically, No need workers to operate the machine. |
Specification
|
Linear rate of welding |
6-36m/min |
|
Production capability |
30Cans/min |
|
Applicable can diameter |
Ø200-300mm |
|
Applicable can height |
200~450mm |
|
Applicable material |
Tinplate steel-based Chrome |
|
Applicable material thickness |
0.16~0.35mm |
|
Seam welding landing |
0.4mm 0.6mm |
|
Seam point distance |
0.5~0.8mm |
|
Applicable copper wire diameter |
ø 1.38mm ø 1.5mm |
|
Cooling water |
Temperature:12-18°C Pressure:0.4~05Mpa Discharge:10L/min |
|
Power |
380V±5% 50HZ |
|
Total power |
18KVA |
|
Dimension |
1750×1100×1800mm |
|
Weight |
1800Kg |
Features
1. PLC(Programmable Logic Controller) is purchased from Japanese MITSUBISHI.
2. Low voltage apparatus are produced by SCHNEIDER.
3. IGBT(Insulated Gate Bipolar Transistor) is bought from Japanese FUJI.
4. OMRON is our sensor supplier.
5. HMI(Human Machine Interface) is purchased from WEINTEC Labs.,Inc in Taiwan.
Usage
1.Apply to the welding of vairous can food cans,increased material cans,aerosol cans, chemical tanks
2.Can body internal and extemal prepainting machine and can body drier are optional tobe added in production line
Can making technology process
Cutting-----rounding-----welding-----coating-----drying-----pre-curling and expanding-----flanging-----seaming bottom-----beading and curling
Applicable types of cans
aerosol can ,food cans ,increased material cans, chemical tanks.
Sample can
Производственная линия
Контакты
Jiujiang Yongxin Can Equipment Co.,Ltd.
Адрес: №5, дорога Антай, зона развития автомобильной промышленности, город Цзюцзян, Китай. 332000
Телефон:86-792-8326978
Мобильный:8618970289827
Электронная почта:liyingquan@126.com
